Equipment Required
| Item | Justification | Comment |
|---|---|---|
| Drone | UUT | - |
| Tape Measure | To measure length, width and height of drone | - |
Test Results
| Result | Partial Pass. Mostly-completed wings satisfy requirements S20, S21. |
|---|---|
| Date | 23 Nov. 2020 |
| Signature | Ben Morgan Palmer |
| Comments |
Testing Procedure
- Measure the length of the drone.
- Length of the drone is measured as the length from the tip of the nose to the end of the tail.
- Measure the width of the drone.
- Width is measured as the tip of one wing to the tip of the other wing
- Measure the height of the drone.
- let the drone stand on the ground with its belly flat on the surface
- measure the height as the length from the ground to the highest part of the drone
- Compare measurements with ERs to see if they meet the requirements
Change Log
| Date | Change |
|---|---|
| 04/22/2020 | Added testing procedure |
Info
| Team Name | P20123 |
|---|---|
| Date | 1 Apr 2020 |
| Author | Atulya John |