RIT will permanently shut down the RIT Wiki (Confluence wiki) on February 2, 2024. Review the Wiki Shut Down Overview for information on alternative tools, exporting content from the wiki, and other FAQs.
Monday, November 23, 2020
Attendees
Guide: John D Wellin
- Customer: Sarah Brownell
- Project Manager: Meghan Britt
- Facilitator: Tyler Swidler
- Purchaser: Nicola Gnecco
- Systems Engineer: Derek Gagnon
Communicator: Anthony Ambrose
Goals
- Inform the customer of changes to the design of the Concrete 3D Printer.
- Present and explain each subsystem design and the testing that has been conducted to inform the design decisions.
- Present the plans for future work that will occur during the break between the Semesters.
Agenda and discussion notes
| Time | Item | Who | Notes |
|---|---|---|---|
| 1 min | Team Vision for Detailed Design Phase | Tyler Swidler | |
| 3 min | Concrete Recipe | Meghan Britt | |
| 4 min | Mixing System | Nicola Gnecco | |
| 5 min | Pumping and Hopper Mechanism | Nicola Gnecco | |
| 5 min | Framing and Motion System | Tyler Swidler | |
| 10 min | Extrusion Mechanism & Duet Board | Derek Gagnon & Anthony Ambrose | |
| 3 min | Plans for Next Phase | Meghan Britt | |
| 4 min | BOM & Budget Updates | Derek Gagnon | |
| 3 min | Risk Assessment Updates | Meghan Britt | |
| 2 min | Corrective Issues & Actions | Anthony Ambrose |
Issues Raised
- List here
- If appropriate, assign action items below to resolve issues.
Decisions Made
- List here
- Listing all decisions where team, guide, and client can see them helps keep everyone on the same page.
Action items
- Complete a peer evaluation after your review. Recommended template is here
- post meeting notes document to each phase
- @mention a person to add them as an attendee to assign action items, with due dates
- add your own action items here