RIT will permanently shut down the RIT Wiki (Confluence wiki) on February 2, 2024. Review the Wiki Shut Down Overview for information on alternative tools, exporting content from the wiki, and other FAQs.
Equipment Required
| Item | Justification | Comment |
|---|---|---|
| Drone | UUT | - |
| Tape Measure | To measure length, width and height of drone | - |
Test Results
| Result | Partial Pass. Mostly-completed wings satisfy requirements S20, S21. |
|---|---|
| Date | 23 Nov. 2020 |
| Signature | Ben M Morgan Palmer |
| Comments |
Testing Procedure
- Measure the length of the drone.
- Length of the drone is measured as the length from the tip of the nose to the end of the tail.
- Measure the width of the drone.
- Width is measured as the tip of one wing to the tip of the other wing
- Measure the height of the drone.
- let the drone stand on the ground with its belly flat on the surface
- measure the height as the length from the ground to the highest part of the drone
- Compare measurements with ERs to see if they meet the requirements
Change Log
| Date | Change |
|---|---|
| 04/22/2020 | Added testing procedure |
Info
| Team Name | P20123 |
|---|---|
| Date | 1 Apr 2020 |
| Author | Atulya John |