Child pages
  • Connecting to Research Computing Systems with SSH
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

The primary mechanism for connecting to Research Computing systems, submitting work, and monitoring progress, and retrieve results is ssh. We have our ssh authentication mechanism tied into RIT’s LDAP service, so you don’t have to remember a separate username and password for RC services – it’s the same as your RIT credentials! If you don’t know what those are, you probably need to get in touch with ITS first.

The following steps will walk you through how to setup ssh on your local desktop or laptop and connect to Research Computing for the first time.

Prerequisites:Getting a Research Computing Account – http://apply.rc.rit.edu

Once you’ve finished this document, you’ll probably be interested in File Management - Getting your files to and from RC systems or Using the bash shell and running software.

Linux and Mac OSX - openssh

The basics

Connecting is simple. Just open a terminal and type the following:

$ ssh username@ion.rc.rit.edu

Where username is your actual RIT username (i.e., abc1234). You will be prompted for your password; enter your RIT password.

Once you’ve entered those, you should be presented with a prompt on the remote Research Computing machine ion.rc.rit.edu, the cluster headnode.

If you’re unfamiliar with how to use a Linux system, you may next want to read the document on Using the bash shell and running software.

X11-forwarding

If you’re going to be doing interactive graphical work, you will want to enable the forwarding of X11 windows. You can do this simply by specifying the -Y option, like so:

$ ssh -Y username@ion.rc.rit.edu

Note

On Mac OSX, just opening a terminal will not be sufficient for X11 forwarding to work. You will need to open X11 for OSX and issue commands from there instead.

Windows - putty.exe

The basics

Unlike for Linux and Mac OSX, there is no in-built ssh client for Windows. You’ll need to download and install putty, which you can download from here.

Once you’ve installed it, open the program and where it prompts you for a host, enter ion.rc.rit.edu.

Click ‘connect’ and you should be prompted for your RIT username and password.

Once you’ve entered those, you should be presented with a prompt on the remote Research Computing machine ion.rc.rit.edu, the large memory computer.

If you’re unfamiliar with how to use a Linux system, you may next want to read the document on Using the bash shell and running software.

X11-forwarding

If you’re going to be doing interactive graphical work, you will want to enable the forwarding of X11 windows.

First, download and install Xming-mesa. Once installed, you’ll need to make sure this program is running before you connect with putty. It is a background application and will only run with a little status icon in your system tray.

Once Xming-mesa is installed and running, open up putty again, but before connecting you’ll need to navigate to the menu item on the left side of the window and ‘enable X11 forwarding’.

Once this is done, you can connect as before. You can test that this works by running the following on lmc.rc.rit.edu:

$ xclock

If a clock appears on your desktop, then you have correctly configured X11 forwarding.

  • No labels