This page contains general information about safety in the SMFL.
SMFL Users Manual(pdf)
SMFL MSDS Listing
- Lab accidents happen all the time, do you know what to do and how to prevent them?
- Be able to recognize the hazards you are working with.
- Eliminate or minimize the identified risks.
- Evaluate the potential risk - probability and severity
- Maintain focus on your experiment
- A few sites that detail lab accidents
Safety Training Information
All users of the SMFL must go through safety training first (refresher or new user) and then take and pass the SMFL Safety Test on a yearly basis.
- Safety Badge Information
- A valid safety badge is required to use the facilities. You receive a new safety badge after taking and passing the SMFL Safety Test
- Badges are good for one year from the date of your last safety test
- Those without a valid safety badge must wear a Visitor Badge - No processing is allowed.
- There are two types of safety training courses offered every quarter.
- New User Safety Training - for people who have never taken the safety test before
- Safety Refresher Course - for people who have taken the safety test before and/or have an expired badge.
Steps to get your safety training
- Go to either refresher or new user training on a yearly basis.
- Remember to sign in at the training session.
- Once you complete the training session, you will be sent a link to the online safety test.
- Take the test - make sure you have read the material.
- See T. Grimsley to review your test results and to get your safety badge.
- The process is not over until you have reviewed your test.
- The SMFL has a large number of chemicals available for use in the facility. There may be times when a chemical needed for a project is not stocked in the SMFL.
- Before any chemical can be brought in, it '''must''' be signed off by the SMFL. This applies to all users whether they are internal or external.
- The SMFL Imported Chemical Worksheet needs to be filled out and submitted with the MSDS before the chemicals can be brought into the lab.
- Fill out sections 1,2 & 6 and bring to T. Grimsley in 17-2511 for review and signoff.
NFPA Hazard Diamond
- The SMFL uses the NFPA (National Fire Protection Association) Hazard Diamond for labeling of chemical containers.
- See the SMFL Chemistry List for specific NFPA ratings for the materials found in the SMFL.
The SMFL maintains it's MSDS database on this wiki.
- There are several computers in the cleanroom - the easiest ones to access for MSDS information are:
- Wet Etch 1
- Wet Etch 2
- These computers are all marked with the yellow /black MSDS sign above them.